UNO R3
Upgraded UNO R3, 100% Compatible to Arduino, works with the software at arduino.cc
Completely solves the traditional incompatible and instability of the UNO R3 to Win7 and Win8 system
Easy to use, with pins socket for inserting DuPont wire.
Support both 3.3V & 5V Power Supply and can meet different IO expansion requirements, including temperature humidity sensor, Xbee module, BT Bluetooth module, RF module, GPRS module, GPS module, LCD shield and so on
This version is optimized in the original version , mainly for foreign customers on product quality and function under demanding conditions designed to ensure both consistent and compatible with the original , but also easy to use.
1 Advantages: a completely solve the traditional UNO board is not compatible with win7 and win8 system instability above .
2 increased pin socket , to facilitate the use of DuPont line .
3 replaces the 16u2, so the cost is reduced by half, consumers get the maximum benefit
CH340 driver
Window/Mac :https://drive.google.com/open?id=0B2rQ0uUeJvj2Ny1iX0NrNjVwb3M
Package:
UNO Only : Arduino CH340*1pieces
UNO Cable:Arduino CH340 *1 USB Cable*1
With AcrylicBox:Arduino CH340 *1 USB Cable*1 AcrylicBox
Note: if you plan to book a large scale purchase, please contact us and get the wholesale price.
Nano Board CH340/ATmega328P
- The Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino, so pls. use the driver from above link.
- It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
- Nano’s got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It’s got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
- The Nano can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Product description
Technical specs
Microcontroller: ATmega328
Architecture: AVR
Operating Voltage: 5 V
Flash Memory: 32 KB of which 2 KB used by bootloader
SRAM: 2 KB
Clock Speed: 16 MHz
Analog I/O Pins: 8
EEPROM: 1 KB
DC Current per I/O Pins: 40 mA (I/O Pins)
Input Voltage: 7-12 V
Digital I/O Pins: 22
PWM Output: 6
Power Consumption: 19 mA
PCB Size: 18 x 45 mm
Weight: 7 g
Pro Micro ATmega32U4
The Pro Micro is based on the ATmega32U4 microcontroller, it running at 5V/16MHz
Supported by Arduino IDE v1.0.1
There are 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections RX and TX on Pro Micro
The ATmega32U4 chip on the Pro Micro board comes preprogrammed with a bootloader that allows you to upload new code to it without the use of an external hardware programmer
The PRO Micro board can be powered via the micro USB connection or with an external power supply
1. The Pro Micro is similar to the Pro mini except with a ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on board and do away with bulky external USB interface.
2. This tiny little board does all of the neat-o Arduino tricks that you’re familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. If you’re supplying unregulated power to the board, be sure to connect to the «RAW» pin on not VCC.
Features:
ATmega32U4 running at 5V/16MHz
Supported by Arduino IDE v1.0.1
On-Board Micro-USB connector for programming
4 x 10-bit ADC pins, 12 x Digital I/Os
Rx and Tx Hardware Serial Connections
Package included:
3* Pro Micro ATmega32U4 5V/16MHz Development Board
Nano V3.0 ATMEGA328
Nano is an ultra-small Simple I/O platform base with open source code .Compared with the previous USB version Diecimila , Nano has a large advantage in size.Arduino can be used to develop electronic appliances which run independently and the interactive effects;Can also be used to develop interactive work which connect to a computer and work with same Flash, Processing, Max/Msp, PD, VVVV software in cooperation.
Features:
- 12 Digital input / output ports:D2 ~ D13
- 8 analog inputs ports:A0 ~ A7
- 1 pairs of TTL level serial transceiver ports RX / TX
- 6 PWM ports:D3, D5, D6, D9, D10, D11
- Using Atmel Atmega328P-AU MCU
- Support USB download and Power
- Support for external 5V ~ 12V DC power supply
- Support power supply by 9V battery
- Support ISP download
Note:
Please allow 1-3mm differs due to manual measurement
Due to the different display and different light, the picture may notreflect the actual color of the item. Thanks for your understanding
NANO V3.0 Adapter
- The Sensor Shield makes your connections with the Arduino Nano much easier
- It is compatible with Arduino Nano 2.0 and 3.0
- The shield has up to 8 analogue pins, 13 digital I/O pins and Aref with 3 pin connectors (GND, Vcc, Signal)
- It also has independent I2C port with 4pins (SDA, SCL, GND and Vcc) and UART (Rx, Tx, Vcc and GND)
- There is a reset button on board and a female jack for external power supply
The Sensor Shield makes your connections with the Arduino Nano much easier
It is compatible with Arduino Nano 2.0 and 3.0
The shield has up to 8 analogue pins, 13 digital I/O pins and Aref with 3 pin connectors (GND, Vcc, Signal)
It also has independent I2C port with 4pins (SDA, SCL, GND and Vcc) and UART (Rx, Tx, Vcc and GND)
There is a reset button on board and a female jack for external power supply
Package Includes:
1 piece Multi-function Expansion Board
Note:
Please allow 1-3mm differs due to manual measurement
Due to the different display and different light, the picture may notreflect the actual color of the item. Thanks for your understanding
RobotLinking UNO R3
UNO R3 board is our new product! It’s 100% compatible with original Ardui-no, now it has perfect quality and performance , we believe it will provide exciting use experience to you!
Ardui-no is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/ Wiring language. Ardui-no can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).
This is the new Tosduino Uno R3. In addition to all the features of the previous board, the Uno R3 now uses an ATmega16U2 instead of the ATmega8U2 chip. This allows for faster transfer rates, no drivers needed for Linux or Mac (inf file for Windows is needed), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.
Package Includes:
1pcs * UNO R3
1pcs*USB Cable
Note: All kinds of product have a paper box.
W5100 Ethernet
This is the latest version of the Ethernet Shield.
This Arduino Ethernet Shield which is based on the Wiznet W5100 Ethernet Chip gives you an easy way to get your Arduino Online.
It is directly supported by Arduino official Ethernet Library.
It adds a micro-SD card slot, which can be used to store files for serving over the network.
It is compatible with the Arduino Duemilanove (168 or 328), Uno as well as Mega (1280/2560) and can be accessed using the SD library.
The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP.
It supports up to four simultaneous socket connections.
Use the Ethernet library to write sketches which connect to the internet using the shield.
Fits all version of arduino Main board,2009,UNO, mega 1280, mega 2560.
Package include:
1pcs Ethernet W5100 Shield development board
Pro Micro ATmega32U4
The Pro Micro is similar to the Pro mini except with a ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on board and do away with bulky external USB interface
2. This tiny little board does all of the neat-o Arduino tricks that you’re familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. If you’re supplying unregulated power to the board, be sure to connect to the «RAW» pin on not VCC.
3. This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled. We’ve also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit.
Feature:
ATmega32U4 running at 5V/16MHz
Supported under Arduino IDE v1.0.1
Recommand power supply for board: 6-7V, less than 9V
On-Board micro-USB connector for programming
4 x 10-bit ADC pins
12 x Digital I/Os (5 are PWM capable)
Rx and Tx Hardware Serial Connections
Our Smallest Arduino-Compatible Board Yet
Wemos TTGO XI 8F328P-U
Details:
TTGO XI is a development board. Comes with USB chip, you can directly connect to the computer burning program. You can use Arduino.cc’s IDE to develop (you need your own installation support). The development environment is recommended, and the LGT support package can be installed directly in the development board manager.
The MCU used by WEMOS X2 is LGT8F328P, a MEGA328P compatible chip. Integrated USB, more convenient to use.
ALPHA 8F328P-U:
ALPHA 8F328P-U is a Arduino compatible development board. You can use Arduino IDE to develop (you need your own installation support). The development environment is recommended, and the LGT support package can be installed directly in the development board manager.
The MCU used by ALPHA 8F328P-U is LGT8F328P, a MEGA328P compatible chip. The USB chip is used in Thailand HT42B534-1, WIN10 and M AC OS X freedrive.
8F328D architecture design relatively new, peripheral function is far stronger than MEGA328. Especially the program encryption capability is far beyond MEGA328. For details, see the data book.
1. Product features
2. It comes with USB and is more convenient to use.
3. The 8F328D can be powered by 3V3 and 5V, operating at 16M frequencies with excellent levels of compatibility.
4. Built in high precision RC, without external crystal oscillator can be stable operation.
5. Less peripheral parts, simple circuit design.
6. 12 bit ADC (analog to digital conversion)
7. Bring DAC
8. Own GUID (unique ID) can be used for chip program encryption
9. Comes with an internal 1.024V/2.048V/4.096V 1% calibration reference voltage source
10. Parameters
Thailand HT42B534-1 USB driver
USB ALPHA 8F328P-U chip is used in WIN10 M AC , Thailand HT42B534-1, OS X, Linux freedrive.
Windows 7, 8, 8.1 drivers: local download
Although ALPHA 8F328P-U is Arduino compatible, but if you are using Arduino IDE, then LGT8F328P support need to do it yourself, more trouble. The development environment has already done a good job, and you can download it directly. We’ll introduce it in the integrated development environment.
Casually find a routine, I use the IDE comes with analog values to send serial routines. Then click the red box download button.
Package included:
1 x Wemos TTGO XI 8F328P-U Board
2 x pin
Mega 2560 R3
CH340G Replace ATMEGA16U2
Microcontroller:ATmega2560
Operating Voltage:5V
Input Voltage (recommended):7-12V
Input Voltage (limits):6-20V
Digital I/O Pins:54 (of which 15 provide PWM output)
Analog Input Pins:16
DC Current per I/O Pin:40 mA
DC Current for 3.3V Pin:50 mA
Flash Memory:256 KB of which 8 KB used by bootloader
SRAM:8 KB
EEPROM:4 KB
Clock Speed:12 MHz
CH340G Driver Download link : http://www.5v.ru/ch340g.htm
IDE of arduino Download link : http://arduino.cc/en/Main/Software
Package Includes:
1pcs * Mega 2560 R3
NRF51822 Development Board
micro:bit NRF51822
You can use your BBC micro:bit for all sorts of cool creations, from robots to musical instruments — the possibilities are endless. This little device has an awful lot of features, like 25 red LED lights that can flash messages. There are two programmable buttons that can be used to control games or pause and skip songs on a playlist. Your BBC micro:bit can detect motion and tell you which direction you’re heading in, and it can use a low energy Bluetooth connection to interact with other devices and the Internet. 1.Supports Microsoft PXT graphical editor available on Windows, macOS, iOS and Android online programming, needs no more compiler download/debug your code on PC via USB download/debug your code on mobile devices via Bluetooth 2.Supports multi popular languages like Javasript, Phython, Mbed C, etc. Microsoft TouchDevelop IDE Microsoft Blocks CodeKingdoms jаvascript MicroPython mbed enable Nordic nRF51822 1.16 MHz 32-bit ARM Cortex-M0 microcontroller 2.Bluetooth® 4.0 low energy/2.4GHz RF SoC 3.16kB RAM 4.256kB Flash Freescale KL26Z — 48 MHz ARM Cortex-M0+ MCU Compass — Freescale MAG3110 3-axis magnetometer, I2C interface Accelerometer — Freescale MMA8652 3-axis accelerometer, I2C interface Power connector — 3V power supply Reset button — reset the system Micro USB connector — for connecting PC, download code, serial communication, etc. 5×5 LED display — 5×5 LED grid Button A/B — programmable buttons I/O connection pins — 5 I/O rings and 20-pin edge connector, including SPI, UART, I2C, Analog, PWM, etc.
Dimensions — 5cm x 4cm
BBC2546862 Micro:bit go
Get creative, get connected & get coding with the BBC micro:bit go. A complete set containing all the parts and inspirational ideas to get started with the BBC micro:bit. Each BBC micro:bit go contains 1x BBC micro:bit, USB cable, battery holder & 2x AAA batteries along with a Quick Start Guide featuring 4 fun ideas all in a retail ready pack. You can use your BBC micro:bit for all sorts of cool creations, from robots to musical instruments — the possibilities are endless. This little device has an awful lot of features including 25 red LED lights that can flash messages, two programmable buttons that can be used to control games or pause and skip songs on a playlist, detect motion and tell you which direction you’re heading in, and even use a low energy Bluetooth connection to interact with other devices and the Internet! Features: Microprocessor: 32-bit ARM® Cortex™ M0 CPU A 5×5 LED matrix with 25 red LEDs to light up and can display animiated patterns, scrolling text and alphanumeric characters Two programmable buttons. Use them as a games controller, or control music on a smart phone On-board motion detector or 3-AXIS digital accelerometer that can detect movement e.g. shake, tilt or free-fall A built-in compass, 3D magnetometer to sense direction and your movement in degrees also the presence of certain metals and magnets Bluetooth® Smart Technology. Connect the micro:bit to other micro:bits, devices, phones, tablets, cameras and other everday objects Five Ring Input and Output (I/O) including power (PWR), ground (GRD) and 3 x I/O. To read values from sensors and control things like motors or robots 20 pin edge connector: This allows the micro:bit to be connected to other devices such as Raspberry Pi, Arduino, Galileo and Kano through a standard connector Micro-USB controller: This is controlled by a separate processor and presents the micro:bit to a computer as a memory stick System LED x 1 yellow System push button switch x 2
Width 1pcs protective case
Adorable and colorful — Micro:bit Protective Silicone Case is aimed to create a more positive and interesting programming environment for children, to get rid of the past boring programming life.
